The documentation doesn't appear to give this up very easily: to reset to Factury Defaults, you'll need to restart the switch while having a serial console open, and hit CTRL-F (lots of times) until the boot completes, and it drops down to a boot-rom style prompt.
Message: "Scan stopped by user" when launching a manual scan
You start a manual scan in Symantec AntiVirus (SAV) or in the Symantec System Center, and then you see the message "Scan stopped by user." Scans will not complete.
# less /proc/cpuinfo
Configuring DHCP address for your network card
If you want to configure DHCP address you need to edit the /etc/network/interfaces and you need to enter the following lines replace eth0 with your network interface card
sudo vi /etc/network/interfaces
# The primary network interface: DHCP address assignment auto eth0 iface eth0 inet dhcp
Configuring Static IP address for your network card
To stop the GUI:
The easist way is to open a terminal and execute these commands:
sudo /etc/init.d/gdm stop
And then ctrl+alt+backspace to end your current session
To restart the GUI:
sudo /etc/init.d/gdm start
If you have hung print jobs in Windows 7 or Vista, you can clear the print queue easily by using these steps.
1. Click Start.
2. Type Command.
3. Right-click Command Prompt and select Run as administrator.
4. Type net stop spooler then press Enter.
5. Type del %systemroot%\System32\spool\printers\* /Q then press Enter.
6. Type net start spooler then press Enter.
The print queue on your Windows 7/Vista system should now be cleared. Type exit and press Enter to exit the command window.
Those out there that use(ed) Outlook Express should know that there is no such thing in Windows 7. Also true in Vista, where "Windows Mail" was released.
Yet another major change for Windows 7: the new (free) email client is called "Windows Live Mail" and the most annoying new "Feature" is the missing menus.
To see the old menu you are looking for; hit the "ALT" key by itself. Then, the menu will magically appear.
See the entire document (Table of Contents) here: